Thông tin nổi bật

GENERAL : 
DEVICE TYPE: STORAGE ENCLOSURE 
ENCLOSURE TYPE: RACK-MOUNTABLE - 2U 

STORAGE: 
MAX SUPPORTED CAPACITY: 12.5 TB 
STORAGE: HARD DRIVE 
TYPE: HOT-SWAP - PLUG-IN MODULE 
​CAPACITY: 0 

EXPANSION / CONNECTIVITY: 
EXPANSION BAYS TOTAL (FREE): 25 ( 25 ) X HOT-SWAP - 2.5 SFF 
INTERFACES: SERIAL ATTACHED SCSI 2 

Thông tin nổi bật

Capacity

Capacity 384 TB maximum with expansion, depending on drive type

Standard number of drives supported

LFF chassis: 12 x LFF (3.5") drives

SFF chassis: 24 x SFF (2.5") drives

Maximum drives supported: 99 SFF drives or 48 LFF drives maximum including expansion

Storage expansion options: HP MSA 2040 LFF Disk Enclosure or D2700 SFF Disk Enclosure

Controller

Host interface

8 Gb Fibre Channel

1GbE iSCSI or 10GbE iSCSI

6/12 Gb SAS

(2 ports per controller)

Number of controllers: 2

RAID Support: 0, 1, 3, 5, 6, 10, 50

Cache Memory: 4GB Read/Write. ECC protection with backup to Flash memory (indefinite backup)

Disk Drive and Enclosure Protocol: 6 Gb SAS - Serial Attached SCSI

Expansion Port: SAS (SFF8088) 4x lane 6 Gb SAS

Thông tin nổi bật

Model differentiator: Pre-Config array with (2) 8 Gb FC Controllers in a Large Form Factor (LFF) Chassis - 12 drive bay Chassis

Drives supported: (12) LFF SAS/MDL SAS

Maximum storage: 48TB Raw

Storage expansion: HP MSA 2040 LFF Disk Enclosure or D2700 2.5-inch disk enclosure

Storage controller: (2) MSA 1040 2-port FC Controller

Host interface: 8 Gb Fibre Channel (2) Ports per controller

Drive description: 300 GB 6G 15K LFF Dual-port SAS

450 GB 6G 15K LFF Dual-port SAS

600 GB 6G 15K LFF Dual-port SAS

1 TB 6G 7.2K LFF Dual-port MDL SAS

2 TB 6G 7.2K LFF Dual-port MDL SAS

3 TB 6G 7.2K LFF Dual-port MDL SAS

4 TB 6G 7.2K LFF Dual-port MDL SAS

Thông tin nổi bật

GENERAL INFORMATION : 
PRODUCT DESCRIPTION: HP MODULAR SMART ARRAY 2040 LFF DISK ENCLOSURE - STORAGE ENCLOSURE 
DEVICE TYPE: STORAGE ENCLOSURE 
ENCLOSURE TYPE: RACK-MOUNTABLE - 2U 

CHASSIS: 
INSTALLED DEVICES / MODULES QTY: 0
SUPPORTED DEVICES / MODULES QTY: 12
SUPPORTED DRIVES: SERIAL ATTACHED SCSI 2 

POWER: 
POWER DEVICE: 2 X POWER SUPPLY - HOT-PLUG - PLUG-IN MODULE
MAX SUPPORTED QTY: 2
POWER REDUNDANCY: YES
POWER REDUNDANCY SCHEME: 1+1
VOLTAGE REQUIRED : AC 120/230 V ( 50 - 60 HZ )

Thông tin nổi bật

Capacity

• HPE Nimble Storage SF-Series Secondary Flash Arrays (capacity per array, with expansion): Starting at 21 TB Raw
• 16 TB Useable
• 128 TB Effective, up to 210 TB Raw
• up to 169 TB Usable
• up to 3 PB Effective (Assumes typical 3x to up to 18x savings, based on Backup retention policy, on a Veeam target)
• Starting configuration based on HPE Nimble Storage SF100 Secondary Flash Array.

Drive description

• Up to (21) LFF MDL SAS HDDs
• 1/2/4/6/10TB drive capacities supported, depending on model. (3 or 6) SFF SSD
• Depending on configuration. 480/960/1920/3840GB SSD Cache capacities supported, depending on model.